<iframe src="https://www.googletagmanager.com/ns.html?id=GTM-5HLLH5Q6" height="0" width="0" style="display:none;visibility:hidden">

Forging Press in Genshin Impact: How to Enable and Use

Forging press in Fontaine. It can be used to create Lumenite Archium, but the forging process itself involves a number of small trials. You can find the mechanism without completing any tasks, but to start it you will have to complete some quests.

In this article we will look in detail at what a forging press is needed for, where to find it and how to use it, as well as why the Lumenite Archium is needed in Genshin Impact.

Where to find a forging press

Location of the Forging Press in Genshin Impact

The path to the forging press is quite long. Teleport to the north of the Liffey District to the cave with Seahorse of a thousand-year-old pearl and move to its southeastern part, where the reservoir is located. Dive into it and swim forward until you emerge from under the water.

Go past the teleporter and enter the southeastern tunnel, where you will have to go underwater again. Keep moving forward until you reach a large door.

To open it, overcome specialmeka: construction. This will activate the terminal, which will unlock the door. Go to the device and press "Clear the way"to go inside.

How to enable the forging press in Genshin Impact

How to enable the forging press in Genshin Impact

Inside the large room there is a forging press, with which further actions will be connected. Before using the device, you can read the instructions for the machine on the box.

Install the archium blank

Go to the device in the center of the room and put it in archium preparation. This item will automatically appear in the character's Inventory as soon as you collect 7 pieces of mysterious ore. Use the map below to find them all.

Read in the special manual, where to find the mysterious ore and how to get the archium blank.

Make sure the pressure in the pipe is within normal limits

If you approach the control terminal, a notification will appear: “Before installing the workpiece, check the power supply system and make sure that the pressure in the pipe is within normal limits.”. Before starting the process, you will need to adjust the pressure in three pipes nearby. Go to where the steam is escaping from the pipes and turn the valves.

Pipe 1

The first pipe is on the northeast wall. Turn the valve twice to get rid of the steam jets.

Pipe 2

The next pipe is located in the southeast, but there is no valve on it.

Where to find the valve Go down a little and you will see the desired item next to two meks. Take the valve, install it on the pipe and turn it once so that the light on it points downwards.

Pipe 3

The last pipe can be found on the northwest side of the cave, next to two mecs. To remove steam, move the valve to the top position.

How to use a forging press

After closing all the valves, return to the terminal in front of the forging press and "Turn on the power system". Now you need to stamp the part in the correct way. Press the button "Forging"when the workpiece glows orange-red and around it a bright circle appears.

Error: System overheating

After several times the system will overheat. You need to resolve the error in order to continue the process.

How to reduce the temperature of a heat sink window

How to reduce the temperature of the heat sink window in a forging press

A large number of slime pyro. Defeat all enemies, use Hydro on the grate on the mechanism (seen in the screenshot) to spawn big Pyro slime. Deal with him and go activate the cooling system.

The grate may not have a fire scale, but if you still can't get the device going, try just hitting it with Hydro a few times until a big Pyro Slime appears.

How to activate the cooling system

It's possible, but not necessarily, go to the terminal on the right and press the cooling function button. The device will display a notification “The cooling system is not responding, the water intake is blocked.” Go down to the eastern part of the room and break the stone that is floating above hydrocoolto get water. Return to the terminal and continue forging.

Error: Water in system

After hitting the workpiece twice, an error will occur due to water in the system. Deal with her to continue forging.

How to enable the emergency drainage function

How to enable the emergency drainage function

Go to the terminal on the right again. It will display the message “Emergency drainage has stopped, the drainage pipeline is blocked.”

Dive into the water and take the skill from xenochrome stingray. Then swim to where the rock was and free the xenochrome jellyfish by cutting the seaweed.

Now borrow the ability from jellyfish and swim to the southwest wall. Scarlet pranksters were placed on a large fan. Destroy them with the jellyfish skill to free the device: to do this, launch a bomb into the center and detonate it. Two more enemies are in the southeast. Make quick work of them by hitting one with a bomb and the other with a normal attack, after which you will receive a hidden achievement.

Return to the terminal and turn on the emergency drainage function. Now start forging again. When the button turns yellow, all that remains is to strike the final blow.

Why is Lumenite-Archium needed?

Complete the forging and take the Lumenite Archium located in the center of the cave.

It must be taken to the secret room to the east of the forging press to open the doors and receive the hidden achievement.

Read in the special article, how to find Brave's secret room and take all the treasures.

Achievement Vengeance on the Scarlet Mischief in Genshin Impact

To get the hidden achievement “Vengeance on the Scarlet Prankster” from the section 5 source stones.

We hope this guide helped you understand how to enable and use the Forging Press in Genshin Impact. If you have any questions or difficulties, please write to comments. Read about Genshin Impact guides on our website.

wotpack.freeanime.info - games, news, guides, walkthroughs
Subscribe
Sign in with
Notify about
guest
90 comments
Intertext Reviews
View all comments
Pilaf
Pilaf
1 month ago

I can't understand, I did everything, I started beating the red pranksters as written in the guide, but he still grows... What should I do? Please tell me

lovechoco
lovechoco
13 days ago
Answer  Pilaf

try holding 1 attack of jellyfish, maybe it will help

soda.
soda.
1 month ago

I don’t know what to do, it seems like everything is there, only there is no cooling stone (before this I don’t when I took the hydro shock absorber there), can you ask me what I should do in this situation???

soda.
soda.
1 month ago
Answer  soda.

oh no, now everything is fine, and thank you very much for the guide!!!

Dog
Dog
1 month ago

The emergency drainage is turned off and no one is swimming in the water, I don't understand anything

Riigus
Riigus
3 months ago

Haha, well, the fact that one of the rewards will be a 5* artifact with random stats is funny
I thought this appeared in Natlan, but it turns out it comes from Fontaine
At least they filled the chests and thanks for that :3

Anna
Anna
9 months ago

where is the stone that needs to be broken? I took the hydrocool much earlier)

6 months ago
Answer  Anna

It should be at the very bottom, look at the mini-map.

baya
baya
9 months ago

why slimes don't appear i can't understand

9 months ago
Answer  baya

Do you have an error about the system overheating? Have you extinguished the hydro grill?

Alexander
Alexander
1 month ago
Answer  Valery

I just press forging endlessly and nothing happens.

2
Content
Click to open content
90
0
Leave a comment! Write what you think about the article.x
()
x
| Reply